The Slimline filters specially made for emergency preparedness are ideal for use with just about any water source including lakes, rivers, streams, ponds, rain and tap water. The ProOne® G2.0 SLIMLINE “All-In-One” Water & Fluoride filter combines a silver infused white ceramic outer shell with new AquaMetix™ media for removal of fluoride and other heavy metals. In addition to primary contaminants, only the ProOne® G2.0 Water & Fluoride filter elements help reduce or remove pesticides, herbicides, chloramines. The ProOne® G2.0 filter is easy to install, use and clean - no priming required and no additional filters necessary to remove fluoride. The new ProOne® G2.0 Water & Fluoride filter elements are tested to meet NSF/ANSI standards 42 & 53 standards.
- ProOne® G2.0 5” Slimline for Scout and Prepper Traveler -- Recommended replacement: up to 4 months per filter.
- ProOne® G2.0 7” Slimline for Prepper Nomad and Prepper Big -- Recommended replacement: up to 9 months per pair.
- ProOne® G2.0 9” Slimline for Prepper King-- Recommended replacement: up to 10 months per pair.
9 Month Limited Warranty
rom Wikipedia, the free encyclopedia
“A TDS Meter indicates the Total Dissolved Solids (TDS) of a solution, i.e. the concentration of dissolved solids in it. Since dissolved ionized solids such as salts and minerals increase the conductivity of a solution, a TDS meter measures the conductivity of the solution and estimates the TDS from that. A TDS meter typically displays the TDS in parts per million (ppm). For example, a TDS reading of 1 ppm would indicate there is 1 milligram of dissolved solids in each kilogram of water.”
TDS is a measure of total dissolved solids and NOT dissolved contaminants. A higher TDS can simply be high calcium or mineral content. As Propur™ filters are made from minerals, TDS may be higher after the water has been treated. This does not mean the filter isn’t working, it means the TDS meter is picking up the minerals that are naturally released by the filter. A PPM meter is the same as a TDS meter, it is simply measures dissolved solids in water. A TDS meter is not generally recognized in the industry as a proper means of testing water for contaminants. They were created years ago by the manufacturers of reverse osmosis systems as a means of demonstrating the effectiveness of RO which removes most if not all minerals.
The ProOne® G2.0 elements have a longer lifespan and faster flow rate than the ProOne® G2.0 Slimline elements. These filters can be used interchangeably. However, we recommend that the ProOne® G2.0 slimline filters be used for emergencies, and the ProOne® G2.0 filters be used for daily use systems.